Call Me Back

    Date:
    Time:

    FENDT 724S4 ProfiPlus

    Used 2016 Year Fendt 724S4 ProfiPlus

    • 6970 Hours
    • Front Linkage
    • 3 x Air Bag Cab Suspension
    • 1 x Front Valve
    • 4 x Rear Valves
    • Load Sensing
    • Very Good Condition

    FENDT 724S4 ProfiPlus

    Used 2016 Year Fendt 724S4 ProfiPlus

    • 5515 Hours
    • Front Linkage
    • Front PTO
    • 3 x Air Bag Cab Suspension
    • 2 x Front Valves
    • 4 x Rear Valves
    • Load Sensing
    • VarioGuide
    • Full Service History
    • Very Good Condition

    FENDT 720S4 ProfiPlus

    Used 2016 Year Fendt 720S4 ProfiPlus

    • 5723 Hours
    • Front Linkage
    • Air Cab Suspension
    • Evolution Seat
    • 4 x Rear Valves
    • Load Sensing

    Fendt Twister 13010T Trailed Tedder

    Used 2021 Year, Trailed Fendt Twister 13010T

    • 10 Rotors
    • 12.7m Working Width

    FENDT Tigo PR45 Forage Wagon

    Ex Demonstration 2021 Year Fendt Tigo PR45 Forage Wagon

    • 1.9m Pickup with Rear Guide Roller,
    • 40 Knives, 37mm potential chop length,
    • IsoBus,
    • Hydraulic Brakes,
    • 710/35R22.5 Nokian Tyres,
    • Trailed Steering rear axle,
    • Low drawbar with Hyd suspension,
    • Side extension plates,
    • 2 Speed floor motor c/w Floor chain gearbox protection,
    • Swing out cutting unit,
    • Knife Sharpening system,
    • Access door,
    • LED Worklights

    FENDT Cargo T740

    *ON ORDER*

    https://cargo-t740.fendt.com/en/index.html

    Cargo T740 Telehandler

    • 7.7m Lift Height
    • 4,000kg Maximum Lift Capacity
    • Cummins,136 HP
    • Reversing fan
    • Hydrostatic 40Kph Transmission
    • Tyres 500/70R24 Alliance A580
    • HTF (High Traction Force)
    • 40Km/h SPT (Schaffer Power Transmission)
    • Load-Sensing hydraulics, 170l/min.
    • Lift-up Fully Suspended Cab with Memory Position
    • Air Conditioning
    • Air Suspension Seat
    • LED Lights
    • JCB Q-Fit headstock with hydraulic tool lock
    • Automatic Bucket Return
    • Rear Pick-up Hitch

    FENDT 722 GEN6 PowerPlus

    Fendt 722Gen6 PowerPlus Setting2

    *Available for Demonstration*

    https://www.fendt.com/uk/geneva-assets/livelink/592455-fendt700vario-2002-en.pdf

    • 6-cylinder Deutz Engine 228 HP
    • 55-Kph Vario Transmission
    • 540/540E/1000/1000E rpm Rear PTO
    • Comfort Front Linkage
    • 152 l/min hydraulics
    • Power Beyond
    • 4 x Double Acting Rear Valves
    • Front Axle Suspension
    • Cab Suspension
    • Air Brakes
    • VarioGuide Standard Novatel
    • Air Conditioning
    • LED Worklights
    • 540/65R30 Front Tyres
    • 650/65R42 Rear Tyres

    Subsidised finance available subject to AgcoFinance terms and conditions

    Warranty up to Maximum of 8 Years/8000hrs at additional cost

     

     


    FENDT 828 S4 ProfiPlus

    Fendt 828S4 ProfiPlus 

    *Available for Demonstration September 2022*

    https://www.fendt.com/uk/geneva-assets/article/46361/155583-fendt800vario-2001-en-v2.pdf

    • 6-cylinder Deutz Engine 287 HP
    • 65-Kph Vario Transmission
    • 540E/1000rpm Rear PTO
    • Front Linkage
    • Front PTO
    • 152 l/min hydraulics
    • Power Beyond
    • 4 x Double Acting Rear Valves and 1 x Double Acting Front Valve
    • Front Axle Suspension
    • Comfort 3 x Air Bag Cab Suspension
    • VarioGrip Tyre Inflation
    • Air Brakes
    • VarioGuide RTK Novatel
    • Air Conditioning
    • Evolution Seat
    • LED Worklights
    • 600/70R30 Front Tyres
    • 710/70R42 Rear Tyres

    Subsidised finance available subject to AgcoFinance terms and conditions

    Warranty up to Maximum of 8 Years/8000hrs at additional cost

     

     


    FENDT 211S Gen3 c/w Cargo 3x/65 Loader

    Fendt 211S Gen3 c/w Fendt Cargo 3X/65 Loader

    https://www.fendt.com/uk/geneva-assets/livelink/661838-fendt200vario-2001-en-web.pdf

    • 3-cylinder AgcoPower Engine 114 HP
    • 40-Kph Single Range Vario Transmission
    • 540/540E/1000rpm Rear PTO
    • Load Sensing Hydraulics
    • 4 x Double Acting Rear Valves
    • Front Axle Suspension
    • Mechanical Cab Suspension
    • Air Conditioning
    • 440/65R24 Front Tyres
    • 540/65R34 Rear Tyres
    • Fendt Cargo 3X/65da Loader
    • Euro Headstock
    • Electric 3rd Service
    • Boom Suspension
    • 3.74m Lift Height
    • 1,680kg Continuous Lift Capacity

    Subsidised finance available subject to AgcoFinance terms and conditions

    Warranty up to Maximum of 8 Years/8000hrs at additional cost


    FENDT Twister 8608DN Tedder

    *ON ORDER*

    Fendt Twister 8608DN, 8.6m Working Width, Mounted 8 x Rotor Tedder

    Thanks to their innovative and well-designed technology, the Fendt Twister rotor tedders are dedicated specialists in fast and clean forage drying. They form the perfect link between mower and hay rake. More than a century of experience in forage harvesting reflected in every detail.

    All Fendt Twisters have a large, thick walled square frame. This ensures a long lifetime and excellent stability, as does the connection of individual rotors via sturdy frame joints, special flange bearings, and hardened bolts. The centre gearbox of the Fendt Twister is immersed in an oil bath and is protected against ingress of dust and dirt. The bearings on both ends provide for unparalleled smooth running.

    All drive components are safely protected against dust and dirt thanks to the closed design, and are lubricated with grease. A large hex shaft and selfcentring crosspiece joints are efficient drivers of the rotors. The maintenance-free system has proven its worth on tedders a thousand times over, and features a direct, straight drive train. The system is also easily accessible and is therefore very maintenance friendly.

    Smart features which make the Fendt Twisters the efficient and well-designed machines that they are, can also be found on the rotors’ wheels. They have been positioned so that there is only a small gap to the tines at the lowest point on the ground. This gives the Twisters excellent ground following, and prevents contamination of the forage. The wheels also have winding protection plates in the rims, which keep grass away from the rim.

    The Fendt Twister tedder tine carriers are made from sturdy, galvanised spring steel strip. The tine arms and rotor plates are directly fitted and have an extra-wide contact area, in a force-fit connection. Rotor plates have a reinforced profile for even more stability and safety. The tine arm is flexible enough to handle any uneven ground, by absorbing the resulting force, so providing maximum protection to the tines and sward. The smooth tine carrier surface means that no forage becomes trapped.

    Using the combing effect, the forage is deposited in two layers by the equal-sided tines with 6 flightings and a flighting diameter of 70 mm, and is therefore turned to perfection. This helps keep the forage clear of dirt. The lifetime is increased since the load on the tines is the same on both sides. The special Super C tines are thoroughly tested in a test cycle developed in-house with 200,000 impacts. The Super C quality characteristic guarantees the ultimate in quality and ensures a very long lifetime. Since the tines are equalsized, there’s no need to keep different spare parts and replacements. The tines are also fitted with an anti-tine loss device.

    Different areas of application demand different settings. On the Fendt Twister the spreading angle can be quickly and easily adjusted between 15, 18 and 21° in a hole template on the wheels. This makes it easy to switch between the three positions of the spreading angle and always reach the optimal work result. Even more evenly dried, your forage guarantees optimal forage pick-up and perfect mixing thanks to the large overlap of the rotors.


    FENDT Former 671

    Fendt Former 671 Twin Rotor Rake

    https://www.fendt.com/int/former-highlights

    Manualy Adjustable working width from 5.8m to 6.6m,

    Individual rotor lift, Tandem Axles

    All Fendt Former multi-rotor hay rakes have a fully cardanic rotor suspension. This gives them outstanding adjustability to the ground, both lengthwise and diagonally, with even forage which lies in wheel tracks or hollows being harvestable without being lost. As a result, the sward is also protected on uneven terrain.

    The tine arms of the Fendt Former rakes are arranged at tangents. This provides the ultimate in raking quality and optimal forage pick-up even at higher speeds. As the double tines are screwed into the tine holders from below a smooth surface on which no forage can hook is produced. The clearance of the tines to the coils is also completed unlimited. The tine arms can be detached after removing a single cotter pin, and tine arm control shafts can be replaced individually without disassembling the rake flange. To do this, only individual screws need to be loosened

    Simple but low-wear, durable and above all, precise: this is the patented SteerGuard steering system. The stub axle steering uses adjustable track rod heads from the commercial vehicle sector. This ensures precise self-steering and excellent stability. In order to direct steering forces towards the rear, the steering shaft is located within the frame and protected against damage. It has just a few separation points and mounts and is therefore very low wear.

    The best swath is the result of an optimised cam track. The special design of the Fendt Former cam track ensures that the tines are lifted and lowered precisely. Due to the standard cam track adjustment, the delivery time can be individually adjusted depending on the forage quality, so that the swath is perfectly formed under all conditions. The output of the trailed machines therefore increases appreciably. The closed design protects the cam track against dirt and dust, and the rotors are very smooth running thanks to the permanent lubrication.


    FENDT 870Kg Front Weight

    Fendt 870Kg Front Weight